-
GROUP 1, 1.6 - E SERIES
- Gear pumps and motors made with alluminium alloy body, flanges and rear covers.
- Displacements from 0,9 cm3/giro (0,05 cu.in./rev.) to 6,5 cm3/giro (0,39 cu.in./rev.)
- All pumps and motors are tested after assembly and run-in to ensure the high standard
required by Salami engineers.
-
GROUP 2 - E SERIES
- Gear pumps made with alluminium alloy body and cast iron flanges and rear covers.
- Displacements from 3,2 cm3/rev (0,19 cu.in./rev.) to 26 cm3/rev (1,58 cu.in./rev.)
- Extremely compact design on the multiple assembling pump for the 2PE type.
- All pumps and motors are tested after assembly and run-in to ensure the high standard required
by Salami engineers.
-
GROUP 2.5 - B SERIES
- Gear pumps made with alluminium alloy body and cast iron flanges and rear covers.
- Displacements from 3,2 cm3/rev (0,19 cu.in./rev.) to 26 cm3/rev (1,58 cu.in./rev.)
- Extremely compact design on the multiple assembling pump for the 2PE type.
- Assembling on multiple stage pump also available in combination with 2PE or 1.5PB types.
- All pumps and motors are tested after assembly and run-in to ensure the high standard required by
Salami engineers.
-
GROUP 3 - B SERIES
- Gear pumps and motors made with alluminium alloy body, flanges and rear covers.
- Displacements from 21 cm3/rev (1.26 cu.in./rev.) to 75 cm3/rev (4.48 cu.in./rev.)
- Assembling on multiple stage pump 3PB/3PB available.
- Assembling on multiple stage pump also available in combination with 2PE type.
- All pumps and motors are tested after assembly and run-in to ensure the high standard required by Salami engineers.
-
GROUP 3.5 - B SERIES
- Gear pumps and motors made with alluminium alloy body, flanges and rear covers.
- Displacements from 55 cm3/giro (3,34 cu.in./rev.) to 98 cm3/giro (6,03 cu.in./rev.)
- Assembling on multiple stage pump 3,5PB/3,5PB available.
- Assembling on multiple stage pump also available in combination with 2PE, 2PB or 3PB types.
- All pumps and motors are tested after assembly and run-in to ensure the high standard required by Salami engineers.
